how to check transmission fluid

How to Check Transmission Fluid

How to Check Transmission Fluid. It should not be forgotten that the gearbox is very important for your vehicle. In the gearbox there are shafts, gears. These parts in the transmission help the vehicle to start when it is stationary, forward when someone shifts into gear, and reverse when reverse gear is shifted. The gearbox forms a gear system with these parts so that it can fully perform its task in the vehicle, and the teeth work by rubbing against each other when the gearbox is running.

In the meantime, if the gearbox oil is not used, serious damage may occur to the parts. Thanks to this oil, abrasions are minimal and transmissions can operate more easily and efficiently. Variations of transmission oil are also available. Different transmission oils can be selected according to the transmission types of the vehicles. The important thing is to choose the right one. The life of this oil is determined by the manufacturers of the cars.

How to Check Transmission Fluid Level of the Vehicle?

To prevent wear and damage to certain parts of the engine, the transmission oil used should be changed over time. So how can you check the transmission oil level?

-First of all, you need to check whether the transmission is manual or automatic. You can check the user manual for this.

-If your transmission is automatic, you need to find the transmission dipstick. You will usually be able to see it as a red piece. Sometimes it has a label on it.

On rear-wheel drive vehicles, the dipstick is usually located at the rear of the engine compartment.

On front wheel drive vehicles, the dipstick is usually located on the driver’s side.

How to Check Transmission Fluid Level of the Vehicle?

Most cars do not have a transmission dipstick. The oil level can be checked with the help of a technological device or after removing one of the screws in the transmission case. Measuring this level in closed transmissions is a more complex and difficult action.

Normal drivers do not have the skills and knowledge to check the transmission fluid level. If the vehicle does not have a measuring stick, you can take it to any transmission shop around you and have it checked.

-After removing the rod, clean it thoroughly and reinsert it. After waiting a few seconds, take it out again and check. If necessary, you can add oil. Your priority should be the oils recommended by the manufacturer. Add slowly, checking the transmission oil level with the dipstick. This oil is easy to add, but when too much is added, it is very difficult to remove.

If your transmission requires more than a liter of oil, or if the transmission uses oil regularly, you should have your vehicle serviced to see if there are any problems.

At the same time, the color and smell of transmission oil is very important. Its light brown and translucent appearance should not change. Automatic transmission fluid is a vibrant red, cherry-like color. If the color is dark red or brown, the oil needs to be changed immediately.

Looking at the odor, if there is a burning smell and there are fragments in the oil, you should also take the transmission to the service.

How To Check Automatic Transmission Fluid?

Automatic transmission oil is the oil used in automatic transmission cars and its color is usually red or green.

Why Should Automatic Transmission Fluid Level Be Checked?

Automatic transmission oil is the most important point of the transmission. The oil provides the necessary pressure for the transmission to work. It also cools and lubricates the transmission.

How To Change Automatic Transmission Fluid?

-Firstly, drain the transmission oil. Then remove the cooling part going from the transmission to the radiator. Attach a piece of rubber hose to the pipe and place the empty end of the pipe in a container. Start the engine and wait. The gearbox oil should flow into the container where you put the tip. Turn off the engine when the oil flow is finished. Then reattach the cooling section to the radiator.

-Remove the screws holding the drain pan cover under the gearbox.

-Clean the drain pan with gearbox oil in the container.

-Install the filter.

-You can install the gasket.

-Insert the crankcase and with the filter and gasket installed, you need to reconnect the crankcase to the transmission. Tighten the screws firmly. But even if you tighten it too much, you will damage the teeth in the transmission and scratch the crankcase.

Now you can fill the automatic transmission oil.

By admin

2 thoughts on “How to Check Transmission Fluid?”

Leave a Reply

Your email address will not be published. Required fields are marked *